Double Eagle M904A Airsoft Rifle With Falcon System in Black

Double Eagle's M904 is a series of economical AEG replicas. Due to the use of reinforced nylon instead of metal alloys, these carabiners are extremely lightweight (approximately 2kg) and convenient thanks to ambidextrous selector lever and charging handle, extended magazine release and magwell, and an adjustable stock. The Gearbox v2 mechanism features a quick-change spring system mounted on 8mm steel ball bearings and rotary hopup. In addition, these replicas include a Falcon electronic control system with programmable fire mode (Double Shot on SEMI or 1-5 Round Burst on AUTO), trigger sensitivity adjustment (3 modes), and motor and battery protection.

This Airsoft Gun is powered by a battery in the stock and includes the awesome Falcon Fire Control System, which allows you to set multiple fire modes from one to five round bursts, as well as a Binary Fire mode that fires when the trigger is pulled and again when it is released, for rapid follow up shots to ensure you hit your target.

If you're searching for an AEG with truly unique features, you've come to the correct place: this replica is equipped with Double Eagle's most recent innovation, the FALCON EFCS fire control system. This feature is a welcome addition, allowing for 1-5 round burst mode, a Binary fire mode, and numerous gun and battery protection features to boot. It is also possible to set both the 1-5 round burst mode and the Binary fire mode simultaneously, with Binary fire being used in semi-auto mode and 1-5 round burst substituting the full auto mode. The fire control system is designed for use with 7.4v Li-Po and 11.1v Li-Po batteries, and it prevents the replica from firing if it detects a current draw surge or a low battery voltage. The EFCS fire system is configurable with simple trigger draws and operates without the need for external tools, special adaptors, or a personal computer. Refer to the Special Instructions section for additional information.

The M904A is partially ambidextrous, with a Fire Selector on both sides to accommodate players with left and right hands. The fire mode selector has been raised to make it simpler to use while wearing gloves. Your Battery should be installed in the stock, which is removed by drawing down on the Stock Adjustment Tabs and pulling it off the Buffer Tube. A 7.4v LiPo Stick is suitable for the available space. The Stock is equipped with QD Sling Sockets for the attachment of Quick Release Sling Loops.

If you wish to modify the gun's furnishings, you have numerous options, including a full length 20mm RIS / RAS rail for attaching red dots, holographic, and even large sight and scope configurations, and an MLOK hand-guard for attaching modular components. If the replica's stock and front flare hider are not to your liking, they can be removed and replaced with suppressors and tracer units. A 14mm CCW Thread is located beneath.

In the box you will find the replica, a 300rnd High Capacity wheel wound magazine, and instructions, as well as a battery adaptor to allow deans batteries to be used, a magazine winding key, and a replacement deans connector if you wish to rewire the replica directly to deans.

This AEG is ideal for Airsoft Skirmishers searching for a high-quality gun at a reasonable price. With plenty of capacity for external upgrades and an electronic control system in place this replica has features which will make the mouths water of even the most seasoned Airsoft Skirmishers.

Features

Features Double Eagles brand new FALCON Electronic Gearbox Design
Based on the M4 / AR Platform
Electric powered Airsoft AEG
Slimline Adjustable Stock
Compatible with 7.4v and 11.1v battery
FALCON EFCS Gearbox and Battery Protection
1-5 Shot Fire selection mode
Trigger sensitivity adjustment
Binary fire trigger mode
Binary mode for semi-auto trigger mode
1-5 Shot fire select for full auto mode
MLOK handguard
Deans to Tamiya converter lead included
Removable flash hider
14mm CCW Thread
Mock charging handle which pulls back to reveal the hop-up unit
Mock bolt release which releases the mock bolt plate
Quick detach sling sockets
Radial adjustable hop-up unit for accuracy and precision
Straight, flat trigger
Flared trigger guard
Raised fire select switch for easy use even with gloves
Textured ergonomic pistol grip
Adjustable motor screw height
Flip up removable ironsights for 20mm RIS/RAS rail
Full top length 20mm RIS / RAS rail
Rubberised butt plate

Includes

• Double Eagle M904A Honey Badger Rifle w/ Falcon Fire Control System
• 120 Mid Cap Magazine
• Deans to Tamiya Adapter
• User Manual

Instructions

Please note that the gun's EFCS system is only compatible with 7.4v LiPo and 11.1v LiPo, and is not compatible with LiFe or NiMh battery.

Please note that both bump fire and burst modes can be set, as bump fire is applied to semi, and 1-5 fire mode is applied to full auto.

Please note that fitting the supplied deans connector will constitute modification of the replica, and will not be able to be returned.

FALCON EFCS Protection Feature

Gearbox Protection

When the current is too high or abnormal the power supply on the EFCS will disconnect to protect the motor and battery, and the motor will vibrate three times.

If the voltage of the battery is too high the EFCS power supply will automatically disconnect and the motor will vibrate two times.

Battery Protection

The FALCON is compatible with 7.4v and 11.1v LiPo battery only, with an operating voltage between 6-13v. If the voltage is too low or too high the power supply will be cut. 

When using an 11.1v LiPo the low voltage protection system will notify the user via 5 vibrations, indicating the batteries voltage is too low to be used.

Vibration Description

• 1 - Power On
• 2 - System Error
• 3 - Voltage too high
• 5 - Low Voltage

Falcon Electronic Fire Control System instructions 

1-5 Shot Mode

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger once and release to enter 1-5 shot programming mode, release when the motor makes a sound.
• Pull the trigger 1-5 times depending on the amount of shots you want a single trigger pull to make.
• Set the fire select to full auto.

Trigger Sensitivity

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger twice and release to enter sensitivity programming mode, release when the motor makes a sound.
• Pull the trigger between 1-3 times for different levels of sensitivity.
  • 1 - Highest Sensitivity
  • 2 - Standard Sensitivity
  • 3 - Low Sensitivity

Bump Fire Mode

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger three times and release to enter bump fire programming mode, release when the motor makes a sound.
• Set the fire selector to semi-auto
• Repeat the same process to disable bump fire

Reset to Default

• Set the fire select to SAFE.
• Pull the trigger and hold for 5 seconds to reset all settings.