Double Eagle M907D - AR15 Airsoft Rifle With Falcon System

Double Eagle's M907 is a series of economical AEG replicas. Due to the use of lightweight metal alloys, one of the primary benefits of these carabiners is their light weight (approximately 2.5kg) and portability (ambidextrous selector lever and charging handle, extended magazine release and magwell, and adjustable stock). The Gearbox v2 mechanism features a quick-change spring system mounted on 8mm steel ball bearings and rotary hopup. In addition, these replicas include a Falcon electronic control system with programmable fire mode (Double Shot on SEMI or 1-5 Round Burst on AUTO), trigger sensitivity adjustment (3 modes), and motor and battery protection.

The Double Eagle M907D M4 AEG w/ Falcon Fire Control System is an AR/M4 platform Airsoft Electric Gun that is powered by a Battery in the rear of the gun and features a realistic external build with Aluminium Alloy & Steel, with the exception of the Pistol Grip and Stock, which are reinforced Nylon Polymer.

If you're searching for an AEG with truly unique features, you've come to the correct place: this replica is equipped with Double Eagle's most recent innovation, the FALCON EFCS Fire Control System. This feature, which is typically reserved for custom builds and high-end AEGs, is a welcome addition, allowing for 1-5 round burst mode, a binary trigger, and numerous gun and battery protection features to boot. The 1-5 round burst mode and bump fire parameters can also be set simultaneously, with binary used in semi-auto mode and 1-5 round burst substituting for full auto mode. The fire control system is designed for use with 7.4v Li-Po and 11.1v Li-Po batteries, and it prevents the replica from firing if it detects a current draw surge or a low battery voltage. Please note that an 11.1v LiPo battery is only recommended by the manufacturer if the replica fires faster than 390FPS. Please refrain from using an 11.1v Battery, as your purchase will be 340FPS out of the box. The EFCS fire system is configurable with simple trigger draws and operates without the need for external tools, special adaptors, or a personal computer. Refer to the Special Instructions section for additional information.

The firearm has a typical AR platform layout, including a Safe/Semi/Auto Fire Selector (which can be programmed without the use of tools), but also a Flat Blade Trigger and Ergonomic Charging Handle. Not only do these components appear incredible, but they also make the rifle easier to handle and operate. The magazine release and fire selector are ambidextrous, making this gun simple to use for both left- and right-handed players. The Battery is stored in the Stock, where a Deans connector can be found within the Buffer Tube. To access the Stock, simply draw down on the Stock Adjustment Lever and slide it off the back of the Buffer Tube.

If you wish to modify the gun's furnishings, you have numerous options, including a full length 20mm RIS / RAS rail for attaching red dots, holographic, and even large sight and scope configurations, and an MLOK handguard for attaching modular components. If the replica's stock is not to your liking, it can be removed/replaced, and the front flash hider can be replaced with suppressors and tracer devices.

Included in the package is a 300-round High Capacity Magazine that is loaded from the top via the Fill Window and then wound at the bottom to begin sending BBs into the gun. You can't go wrong with the Double Eagle M907D M4 AEG w/ Falcon Fire Control System if you're looking for an incredibly intelligent Airsoft Gun with distinctive external furnishings and a solid Alloy body.

Features

FALCON Fire Control System
Based on the M4 / AR Platform
Electric powered Airsoft AEG
FALCON EFCS Gearbox and Battery Protection
1-5 Shot Fire selection mode
Trigger sensitivity adjustment
Binary Trigger mode
Binary fire select for semi auto
1-5 Shot fire select for full auto mode
MLOK handguard
Mock charging handle which pulls back to reveal the hop-up unit
Mock bolt release which releases the mock bolt plate
Ergonomic charging handle
Ambidextrous magazine release
Radial adjustable hop-up unit for accuracy and precision
Straight, flat trigger
Textured ergonomic pistol grip
Adjustable motor screw height
Flip up removable ironsights for 20mm RIS/RAS rail
Full top length 20mm RIS / RAS rail
Removable flash hider secured by grub screw
Six position sliding stock
Rear wired / Version 2 gearbox
Rubberised butt plate
Branded:'FALCON Fire Control System'
'DE AIRSOFT'

Package Includes

Double Eagle M907D M4 AEG w/ Falcon Fire Control System
300rnd High Cap Magazine
Instruction Manual

Special Instructions

Please note that the gun's EFCS system is only compatible with 7.4v LiPo and 11.1v LiPo, and is not compatible with LiFe or NiMh battery.

Please note that both binary fire and burst modes can be set, as binary fire is applied to semi, and 1-5 fire mode is applied to full auto.

Please note that fitting the supplied deans connector will constitute modification of the replica, and will not be able to be returned.

FALCON EFCS Protection Feature

Gearbox Protection

When the current is too high or abnormal the power supply on the EFCS will disconnect to protect the motor and battery, and the motor will vibrate three times.

If the voltage of the battery is too high the EFCS power supply will automatically disconnect and the motor will vibrate two times.

Battery Protection

The FALCON is compatible with 7.4v and 11.1v LiPo battery only, with an operating voltage between 6-13v. If the voltage is too low or too high the power supply will be cut. 

When using an 11.1v LiPo the low voltage protection system will notify the user via 5 vibrations, indicating the batteries voltage is too low to be used.

Vibration Description

• 1 - Power On
• 2 - System Error
• 3 - Voltage too high
• 5 - Low Voltage

Falcon Electronic Fire Control System

1-5 Shot Mode

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger once and release to enter 1-5 shot programming mode, release when the motor makes a sound.
• Pull the trigger 1-5 times depending on the amount of shots you want a single trigger pull to make.
• Set the fire select to full auto.

Trigger Sensitivity

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger twice and release to enter sensitivity programming mode, release when the motor makes a sound.
• Pull the trigger between 1-3 times for different levels of sensitivity.
  • 1 - Highest Sensitivity
  • 2 - Standard Sensitivity
  • 3 - Low Sensitivity

Binary Fire Mode

• Set the fire select to SAFE.
• Pull the trigger and hold for 3 seconds to enter programming mode, and release when the motor makes a sound.
• Pull the trigger three times and release to enter bump fire programming mode, release when the motor makes a sound.
• Set the fire selector to semi-auto
• Repeat the same process to disable bump fire

Reset to Default

• Set the fire select to SAFE.
• Pull the trigger and hold for 5 seconds to reset all settings.

The externals of the replica are metal where they would be on the real world gun. This includes things like the outer barrel, handguard, and receiver. If a real world gun has polymer parts then the gun will still be marked as full metal externals, examples of this would be an M4, where the Stock and Pistol grip are always made from Polymer.